A rosin press enables people to extract cannabinoids or THC at home using a rosin press machine. Using a combination of pressure and heat, a rosin press extracts a sap-like substance from a cannabis material, which is known as rosin.
If you have never made rosin before, you might be unsure how to create an effective set-up in your home. If so, check out these five tips for making a high-quality rosin press and you’ll never look back.
Swap Straighteners for a Rosin Press Machine
Rosin extracts were originally produced using hair straighteners, but the beauty gadget is no longer the best solution for the oil. Nowadays, people can invest in a quality rosin press machine to use at home.
Despite being handy initially, hair straighteners have insubstantial and inaccurate heat for creating good-quality rosin with a high or low yield. For instance, this rosin press at amazon.co.uk is simple to use, provides an average high yield rate of approximately 25%, and can be used to press flowers, essential oils, and much more.
Calculate the Pressure
You will need to take your desired PSI (pounds per square inch) and then multiply it by the material area in inches to accurately calculate the total pressure. For instance, if your desired pressure is 1,500 PSI and the material area is eight square inches, you must apply 12,000 pounds of pressure, which means you’d need to buy a six-ton rosin press machine or larger.
Use a Pre-Press Mould
A dependable rosin press machine should feature a pre-press mould, as it will compact the cannabis material into a puck. It helps push out air and improve its density, making it easier to extract oil.
As the dense puck is rigid and unable to change shape, it will lead to a more consistent Platen PSI (pounds per square inch) that won’t decrease. It is one of the most effective, easiest ways to increase the yield of your rosin.
Always grind herbs before adding them into a pre-press mould. It will make it much easier to pre-press them into a puck, as it will decrease the air hole size between the ground material.
Set the Correct Time and Temperature
The time and temperature you set will determine the quality of your rosin. You will need to decide whether to go high or low, slow or fast, or find a balance between the two. Trial and error will help you master the rosin-making process, as you’ll learn how to make a quality extract with the correct yield for your needs.
Choose the Right Micron Filter Bags
You’ll need more than a high-quality rosin machine and accurate time and temperature to create the best rosin. Don’t underestimate the importance of micron bags. A small micron bag rating might lead to a better-quality rosin, but it will come at the cost of the yield. However, a higher quality micron bag rating will boost the yield while reducing the quality.
Images courtesy of unsplash.com
